When mounting a radome or satdome on a horizontal surface, your choice of a vertical, or forward or aft leaning mount is based largely on aesthetics, but can a mount can also be used to position an instrument to avoid an obstruction or installed equipment - such as another antenna.
This 5" tall Seaview aft leaning radar mount is made of highly polished 316 stainless steel.
A non-modular mount, the top plate is welded on and pre-drilled for the radar types and models listed below.
The base plate of the mount measures 7" x 7".
This mount is compatible with Seaview's line of stainless steel light bars.
Holes on aft side of mount allow for cable routing and the optional lightbar.
The PMA-5U-7LSS mount with integral top plate can be used with most closed dome radars.
The top plate has slotted mounting holes which will accept the following radomes:
• Furuno 15" - 19" radomes, DRS4D, and GYRO
• Geonav 24" radomes
• Koden 18" radomes
• Lowrance 18" radomes, and LRA 2000
• Lorenz 12" - 20" radomes
• Northstar 18" radomes
• Seiwa 12" - 23.5" radomes
• Simrad 18" radomes
• Sitex 12" - 24" radomes
• Tech Marine 12" - 20" radomes
This mount is supplied with a base gasket, a cable grommet, and a plug for the light bar socket in case it is not used.