Pro-Cure X-98 "Fast" Accelerator additive may be used to decrease dry and cure times in Awlgrip Urethane Topcoats and Awlcraft 2000 Topcoats to 4 to 6 hours (@77°F).
Pro-Cure X-98 should only be used in spray applications. Do not use with Awlgrip primers.
Mixing instructions for Pro-Cure X-98 (73014) for spray applications only — 1/4 oz per gallon of mixed topcoat color base + converter. This is the maximum you can add; lesser quantities may be sufficient.
This is equivalent to 3 capfuls if measured using the screw top cap.
There is no induction time after adding and mixing.
Pro-Cure X-98 should only be used in spray applications.
Recoat times — If mixed at full amount, may be recoated or taped in 4 - 6 hours at 77°F and 50% relative humidity.
Do not use if anbient temperature is above 75°F
Do not use when application surfaces are hotter than 105°F or colder than 55°F.